Product Description
Transformer oil reconditioning unit TF 6000 L/h for degassing and filtration of transformer oil.
The filter is delivered tested and CE-marked. For testing Nynäs Nytro 10XN transformer oil is used.
- Degassing capacity: Max 6000 L/h, adjustable (~100 L/minute)
- Pump station mode: Max 9000 L/h, adjustable (~150 L/minute)
- Single stage filter with 1 pcs degassing chamber
- Operating pressure (TF 6000 L/h): Between 1 and 10 mbar (Not below 1 mbar)
- Heating power: 74 kW as standard (Optional max 148 kW)
- Temperature increase/passing (74kW): approx. 40°C
- Surface power in heating chamber (Thermal flux): 1.0 W/cm2
- Rotary vane vacuum pump: 1 pcs á 300 m3/h
- Oil pump (TF 6000 L/h): 1 pcs magnetically connected screw pump
- Filter housing with 1 pcs filter cartridge (Easy to replace)
- Automatic valves for inlet / outlet
- Control via 7″ HMI Touch display
- Pre-programmed programs (4 pcs) for easy handling
- Vacuum instrument: Digital via 7″ HMI display with Pirani sensor
- Flow meter with total calculation
- Automatic level regulation (Oil level and foam level)
- Standard voltage and frequency: 3x400V, 50Hz
Mobile / Stationary
TF transformer oil reconditioning unit are manufactured with a welded, painted steel chassis. The frame can be adapted as a mobile or stationary unit. The TF series is available for some models as a mobile unit on a trailer, for transport on public roads or as a stationary unit delivered with or without cover plates or canopy. Also delivered assembled in a container of any size is another possibility. Typically a 10-foot storage container.
Filtration and heating
An oil heater with several heating elements heats the oil to desired temperature by means of indirect heating of the oil. The heater also partially functions as a heat accumulator and prevents major temperature changes during operation. The heating elements are thermostatically controlled and automatically heat the oil to the set temperature. The heating group has high capacity and a large heating area but with a low surface effect of 1.0 Watt/cm² to prevent hot spot cracking of the oil.
Extra pre-heater (74kW) can be integrated into the larger high-flow equipment and / or equipment used at colder temperatures.
Particle filtration is done with a cartridge filter. It is easy to change the filter cartridge in the filter housing and the 7" HMI screen gives an alarm to the operator when it is time to change the filter cartridge.
TF filter cartridges filters the transformer oil according to βx(3) ≥ 2000 according to ISO 16889 with code 07/04/01.
Degassing
The degassing principle is based on an even flow of oil over specially developed Raschig rings. With this process, a controlled and highly efficient degassing is obtained.
Single stage degassing
Degassing in one step with a single stage rotary vane vacuum pump. During a single pass, the amount of water in the oil is reduced to <5 ppm and the residual gas value to <0.2% (at starting value: <50ppm, 10%). The pressure in the vacuum degasser must not fall below 1 mbar. Treatment of the oil must be done safely and with a pressure that is higher than the vapor pressure of the transformer oil. This is to minimize the risk of removing additives that the manufacturer has added to the insulating oil, e.g. inhibitor etc. Therefore we do not have a root pump in our standard equipment.
Accessories
Standard equipment included in the TF-series transformer oil reconditioning units:
- Inlet hose 10m incl. lockable camlock (Autolock)
- Outlet hose 10m incl. lockable camlock (Autolock)
- Suction nozzle for oil filling (Use with barrel or IBC)
- Hoses for draining the system
Options
- Process monitoring via router/sms/GSM. With this technology, you can read measured values, operating functions, receive any operating alarms and carry out troubleshooting in real time.
