Home / Oil Filter / TF75 4.500l/h Transformer Oil Filter

TF75 4.500l/h Oil filter

Transorfilter Sweden performs reconditioning of transformer oil through heating, particle filtration and degassing. The oil is heated to about 70°C and through patented technology it is effectively treated and its insulating properties improved.

Reconditioning the oil is a much more environmentally friendly alternative than replacing the oil with new. In addition, brand new oil from the factory must also be degassed (dried) before it can be used in a power transformer.

Two of our standard capacity TF-series products are TF75-1, TF75-2 which are best suited for medium / large transformers. Recommended for most large applications where an oil with good properties is required. For the best quality of degassed oil, our 2-stage filter TF75-2 is recommended. With extra preheater (-A), this filter is called TF75-2A.



Product Description

Transformer oil filter TF75-1, TF75-2 for degassing transformer oil.

The filter is tested before delivery, CE-marked and filled with Nynäs Nytro 10XN transformer oil.

  • Degassing capacity: 75 l/min (4.500 l/h)
  • Single stage filter (-1) with 1 pcs degassing chamber
  • Double stage filter (-2) with 2 pcs degassing chambers
  • Operating pressure (TF75-1): <5 mbar
  • Operating pressure (TF75-2): <0,5 mbar
  • Heating power: 84 kW
  • Optional extra heater (-A): 48kW
  • Temperature increase/passing: approx. 60°C
  • Rotary vane vacuum pump: 1 pcs á 200 m3/h
  • Roots vacuum pump: (TF75-2): 1 pcs á 250m3/h
  • Built-in compressor for backflushing: Yes
  • Digital flowmeter: Yes
  • Vacuum instrument: Digital with Pirani gauge
  • Filter vessel with 151 pcs oil-treated lamella filter elements
  • Oil pumps (TF75-1): 2 pcs magnetic coupled screw pumps
  • Oil pumps (TF75-2): 3 pcs magnetic coupled screw pumps

Mobile / Stationary

The TF-series transformer oil filter units are manufactured with a welded, painted steel frame. The frame is adapted as a mobile or stationary unit. The TF-series units are available as a mobile unit on a trailers, for transportation on public road, mobile unit with simple wheels for mobility on site or as a stationary unit mounted in a container.

Filtration and heating

A large steel vessel with heating elements and filter elements, heats the oil and filters away particles. The vessel acts as a heat accumulator and prevents larger temperature changes of the oil during operation. The heating elements are divided into individually thermostatically controlled heating groups and are automatically adjusted to the set temperature. The heating groups have high capacity and a large heating area with a surface effect of 1.6 Watt/cm².

Extra pre-heaters (A) can be integrated into the larger high-flow equipment and / or equipment used at colder temperatures.

Particle filtration is done with patented lamella filter elements which are oil treated. The elements are constructed of filter lamellas through which the oil is pressed. Built-in backflush system cleans the filter elements and filtered-out particles are flushed out of the equipment. The lifetime of the filter elements is up to 10 years if regular backflushing is done.

TF lamella filter elements filter transformer oil according to ISO 4406, code 16/14/13.


Patented degassing principle with an even flow of oil over specially developed degassing plates. This process results in controlled and highly efficient degassing. Available as two variants, single stage degassing in one vessel or double stage degassing in two vessels.

Single stage degassing -1

Degassing in one stage with rotary vane vacuum pump. At one pass-through, the amount of water in the oil is reduced to <5 ppm and residual gas value to <0.2% (at start value: <50ppm, 10%). Can be supplemented with roots vacuum pump for process optimization.

Double stage degassing -2

Degassing in two stages with more efficient high degassing in the second stage. A rotary vane vacuum pump is working towards the first and second stages and a roots pump working towards the second stage. At one pass-through, the amount of water in the oil is reduced to <5 ppm and residual gas value to <0.1% (at start value: <50ppm, 10%).


Standard equipment included in the TF-series transformer oil filter is:

  • Inlet hose L=10m incl. lockable camlock connections
  • Outlet hose L=10m incl. lockable camlock connections
  • Built-in compressor for backflushing of filter elements
  • Suction nozzle for oil filling (Use with barrel or IBC)
  • Oil sample connections with ball valve and sample hose


  • Process monitoring via router / sms / GSM. With this technology you can read measured values in real time, adjust operating functions, get any operational alarms and troubleshoot.


Additional information

Weight4500 kg
Dimensions299 × 244 × 259 cm

Related products